Slotting Machine (B5032D)

-This machine tool is used to process plsnes, model surfaces, key seating, etc and it is suitable for the single-piece or small-batch production workshop. -The main transmission mechanism is to transmit the throw-over motion of the rock er arm into the to-and-fro motion of the ram the operating platform can move vertically and horizontally and revolve it is able to achieve automatic feed and hand operating feed. Also it can move fast in case of breakdown, the platform will automatically stop feeding and achieve limit safey. -When the machine tool is startde, stop using electromagnetic chutch so as to achieve concentration operation of the machine tool. -Indexing mechanism is used for the graduation of the throw-over motion of the operating platform parts are processed according to the desired graduation. -This machine is carefully designed and it is characteristic of standardization, generalization, serialization, high degree automation. Also it is of reasonable diatrbution, compact surcture, wll-balanced proportion, good outer looks and convenient maintenance. -The lubrication of the machine tool is brought about by the oil pump, and lubrication oil is transmitted to various points by the oil-transmitting tubes with convenient adjustment. -The electric equipment of the machine tool is fixed in the bed at the back part of the lower bed it is safe and reliable because there are concentrated push buttons in the upeer bed. -As for other power source conditions raised by the customer, special orders of goods supply can be effected through negoti-ation.Model B5032D Max. slotting length 320mm Max. dimensions of workpiece (LxH) 600x 320mm Max. weight of workpiece 500kgs Max. cutting force 7500N No. of ramistrdes per min. 20.32.50 .80rpm Vertical adjustment of ram 315mm Inclination of ram 0-8 O Distance between tool holding surface and column front 600mm Max. tool shank size (WxH) 25x 40mm Table diameter 630mm Distance between table surface and low end of ram 490mm Max. longitudinal travel of table (power feeds/hand feeds) 480/ 620mm Max. cross travel of table (power feeds/hand feeds) 480/ 560mm Max. rotary angle of table + 360 O Range of table longitudinal and cross power feeds 0.08 -1.21mm Range of table power feeds 0.052-0.783 Power of rapid drive motor 4kw Rotating speed of main drive motor 960rpm Power of rapid drive motor 0.75kw Rotating speed of rapid drive motor 910rpm Overall dimensions (LxWxH) 2180x1505x 2285mm Weight (approx) 3000kgs