Palm Oil Equipment

We have enough experience and advanced machinery for making Palm oil, which lead the technicity in this field. The rude oil from palm fruite or solvent process, which should be refined for the better edible oil. The capacity is from 10t to 500t per day. Normally capacity is less than 30t, directly pressing better. 1. PALM FRUITE PRE-PROCESSING SECTION: Sterilizing section: Fresh palm fruit bunch are airtight sterilized in sterilizer. The purpose to prevent enzymes broken down, avoiding FFA content in oil further increase; Pretreatment peel, prepared for the follow-up processing; Pre-conditioning stone, reducing the damage kernel. Picker palm fruite setcion: Remove the palm fruit from the bundle. Boiling section Oil palm fruit first carry out cooking before pressed, fruit sterilized must be re-heating for the soft pulp, and damage pulp cell structure. 2. Pressing section: The process adopts the special screw oil press, so the palm nut is out with the dregs without damaging. 3. Clarification section: The crude oil first diluted with water washing, through settlement and filtration, the fiber material removed from the oil, and then carries out continuous settlement, the whole divided into two parts: Oil and sediment. Oil is filtered and through the pump pumped into the storage tank for storing; Oil sediment is filtered and dirt oil separation, oil processed is for the second settlement, dirt oil mixture process clarification separation, Skim oil then carry out a second settlement, sewage pumps to sewage treatment pond for dealing with. 4. Palm nut treatment process/Centrifuge sieve This process adopts the centrifuge siever to separate the nut and fibre and dregs. 5. Cooking oil refinery and The crude vegetable oil from above mentioned two ways of extracting, oil pressing and/or solvent extraction, will be pumped into oil refinery units to produce cooking oil at various grades. The crude palm oil from the palm will be pumped into oil refinery units to produce cooking oil at various grades. We adopts advanced physical refinery technology, which is most methods for new CPO factory now. The main operating process is including sedimentation/filtering, degumming, decolorization (bleaching), neutralization (removing free fatty acid) & deodorization with distillation, especially the fractionation process is necessary, which could get different liquid oil and fat. Different combination of steps and the treating degree of each step result in different grade cooking oil and salad oil. Especially the fractionation of palm is important for getting different grade oil. Note: We have the different oil mill factory for the visit. We supply for the turn-key project now and then.