Sitting Two Component Road Marking Machine (DY-STC-I)(0)

DY-STC-I Sitting Two Component Road Marking Machine 1. Engine: 20HP Gasoline Engine 2. Marking With: 100-300mm(Change Marking Shoe) 3. Driving System: HTS 4. Paint Tank/ Glass Beads Bin: 200+50L/50L Description of DY-STC-I/II/III Road Marking Machine The two component road marking machine is a new type and superior road marking and popular in recent years. It is different from thermoplastic and cold plastic road marking, which forms coating relying on chemical reaction instead of physical drying such as temperature falling or solvent (water-based) volatilizing. Different between I, II, III Road Marking Machine 1. Marking shoe I: The upper part is equipped with automatic stirrer filled with paint and hardener. 2. Marking shoe II: The upper part is equipped with automatic stirrer filled with paint and hardener while the lower part equipped with acentric shaft with special treatments. 3. Marking shoe III: Equipped with four new-type air-operated spray guns, one hand spray gun with an extension pipe. Parameter of DY-STC-I/II/III Road Marking Machine.