DY-HAL-V Hand-Push Airless Road Marking Machine

DY-HAL-V Hand-push Airless Road Marking Machine 1. Engine: 6HP Gasoline Engine 2. Marking With: 100-200mm(Spray with Gun) DY-HAL-V Hand-push Airless Road Marking Machine mainly is suitable for the road, the parking lot, the airport, the gas station, the company factory district and spreads delimits to mark the straight line, the dashed line, the curve, the zebra crossing, the writing, the arrow, the graphic mark etc. Main Feature for DY-HAL-V Hand-push Airless Road Marking Machine 1. Paint pump is Imported diaphragmatic high pressure with big flow and stable pressure. 2. Directional device controlled by the brake handle to ensure the road-marking machine to operate freely in straight line or turning. 3. Single new-type manual spray guns with hard side columnar reverse washed nozzles(20/25) which can make the on-spot discharging easy and convenient; The non-arc nozzle ensures the line straight and exact. The6m lengthening pipe which is installed with the machine can be used for spraying special signs or lines like arrows, letters or pedestrian lines. Note: 1. Option for line driver DY-RB-II for operator to realize automatic function. 2. B type equipped with air-compressor, glass beads pressurized bin, glass beads spray gun and glass beads spray control system and stainless steel spray system to meet the needs of water paint construction. 3. Except all the functions of B type, C type equips with a micro-electric control system, which consists of Micro-electric controller, on-off coder, electromagnet, special gun bracket and so on. This system can be set four kinds of marking way according to the national road marking standard, and realized fully automatic control Technical Data of DY-HAL-V Hand-push Airless Road Marking Machine