Single-wall Corrugated Board Production Line

This finished product, single wall corrugated board, is mainly introduced as inner packing material. It can be also used as outer packing material for light or small-sized commodities. Four flutes A, B, C and E as well as special customer-tailored flutes are provided. Steam heating system and oil heating system are optional (but oil heating is not suitable for line with speed above 100m/min). The standard three ply line is made up of Single facer (1), mill roll stand (2), preheater (optional in case of speed below 120m/min), conveying bridge (1), glue machine (1), double facer (1), slitter scorer (1) (thin-blade or flaring slitting tool is optional), cut-off (1), stacker (1). Speed of 80m/min, 100m/min, 120 m/min, 150m/min or 180 m/min is offered to meet customer’s requirement.一、 MAIN TECHNICAL PARAMETER 1、Model Type： WJ180-1600-1 2、Maximum Mechanical Speed：180 m/min3、Breath：1600 mm 4、Flute Type：UV　C and B （may select flute A、BC、D、E alternate ） Flute Type and technical parameter Flute Height(mm) Teeth Quantity　300mm Remark A 4.6－4.9 34±2 UV shape C 3.6－3.9 38±2 UV shape BC 3.2－3.3 44±2 UV shape B 2.6－2.9 50±2 UV shape D 2.0－2.2 78±4 UV shape E 1.5-1.8 88±2 Might make UV to V shape according to the requirement of the clients 1.1-1.5 92±2 F 0.8-1.0 128±2 5、production speed： 150-170m/min, single wall (3 ply )130-160m/min, double wall (5 ply )Condition of Checking up and Acceptance(Examining condition):According to The National Standards of China, if the production line has been put into 3ply production 10 minutes. Run by 90% of the Maximum Mechanical speed-160 m/minute here, the production line could be checked up and accepted.PAPER FOR TEST： Test for the highest speed of 3 ply: corrugated paper:125 g/m2 outer paper: 300 g/m2 Common test for 3ply and 5 ply: corrugating paper：113-125g/m2；Core Paper 125g/m2；Inner paper ：120-150g/m2； outer paper 120-200g/m2 （Note：The quality of paper is measured up above the standard of NATIONAL STANDARD B GRADE OF CHINA.PAPER FOR PRODUCTION：Corrugating paper ：105-115g/m2；Core Paper 105-115g/m2；Inner paper ：110-135g/m2; outer paper 120-150g/m26、Steam Consumption:2000 kg/h Steam Pressure:1.1-1.2 MPa7、Power supply:～ 230 KW(380Vac, 3 phases, 4 wires, 50Hz)8、Length of production line:～65 meters9、Length of cutting:500-9999 mm10、Accuracy of cutting（stable speed0:± 1.0 mm）11、The using life:more than 10 years.