HTR Series Gantry Type Hydraulic Cutting Machine USE AND CHARACTERISTICS 1. The machine is used for cutting operation of nonmetal materials such as leather, paper, plastic film, textile and rubber etc. By die cutter. 2. The machine adopts PLC control and human-machine interface operation with convenient use. 3. The machine is installed with front and rear movable cutting heads (pressing boards) driven by the motor. During the operation, it provides workers with optimal excellent visual field, safety and reliability. 4. The special hydraulic design guarantees the continuous output of cutting force so as to realize low energy consumption. 5. The machine is provided with automatic cutting depth adjustment device to guarantee the cutting precision. 6. The machine is provided with high-precision safety screen on its operation surface, which can guarantee personal safety of operators and realize automatic operation of the machine. 7. The quenched steel plate can be optionally allocated to realize precise cutting without consumption of cutting board. 8. The heating board can be optionally allocated so that the machine can carry out pressure holding forming operation.Model HTR500 HTR630 HTR800 HTR1000 Maximum cutting force 500KN 630KN 800KN 1000KN Cutting area(mm) 1200*850 1200*850 1600*850 1600*850 1600*1050 1600*1050 1800*1050 1800*1050 1800*1050 1800*1050 2100*1050 2100*1050 Tension distance(mm) 200-25 200-25 200-25 200-25 Adjustable stroke(mm) 175-20 175-20 175-20 175-20 Automatic blocking adjustable range(mm) 40 40 40 40 Motor power 3.0KW 3.0KW 5.5KW 5.5KW
