XF Horizontal Fluidizing Drying Equipment Description Fluidizing drier is also called fluidization bed. It consists of air filter, heater, fluidizing-bed main machine, feeder, cyclone separator, cloth bag duster, high-pressure centrifuge fan and console. Because the property of raw material is difference, it is necessary to equip dust remover in accordance with practical needs. It can select cyclone separator and cloth bag duster both or one of them. In general, it needs to select cyclone separator only for raw material that is large and cloth bag duster for the raw material which is powder or small and light granule, meanwhile there pneumatic feeding device and belt conveyor for selection. Operation of this machine are continuous and intermitter type. Steam, electricity or hot air furnace can be used (it can be supplied as request). Principle XF fluidization drier use clean air after filtrating, through heat exchange, make air temperature rise to a certain value into main machine, then through distributor of valve plate into fluidization, material from feeder enter into the drier, because of wind pressure, raw material from boiling state in drier, the wide Contact between hot air and raw material, increasing the process of hot exchange. In short time, make water vaporizing, raw material is discharged from the outlet, exhaust gas disc ha rged from the top of the fluidization bed, and discharged from cyclone separator, dust filter with cloth bag after reclaiming material. The machine is working in negative pressure. Scope of Application Used on medicines chemical raw material, foodstuff, grain processing, feed and so on. For example, raw medicine, granular tablet, Chinese traditional medicine, health foods, drinks, maize embryo, feed, plastic resin, citric acid and other powders. The suitable diameter of raw material is normally 0.1-0.6mm. The most applicable diameter of raw material will be 0.5-3mm
