The Sensor of Switch is Diaphragm type, it can be suitable for air, gas such neutral gas and water, hydraulic oil, light fuel, lube and other fluid medium which would not exert corrosion to pressure sensor material. The Set Point of the Switch is adjustable, the adjustable range is from 0.02 Mpa to 3Mpa. Working Viscosity <1x10-3m2/s Switching Elements: Microswitches Protection Class of Enclosure: IP65 (accord with DIN40050) Ambient temperature: : -20º C~50º C Medium Temperature: 0~90º C Mounting Position: Pressure connection virtically downward (an angle of 15 is allowable). Anti-Vibration: Max. 100m/s2 Repeatablity Error: ≤ 1.5% Electrical rating: AC 220V, 6A(Resistance) Characteristic: Mini Structure, good Anti-vibration Remarks: *)In the practice, even the temporal peak value of pressure, should no exceed the Max. Allowable Pressure. **) refer to the specification of the sealing ring * **) I--the connection is inner screwed, P--the connection is flange The Adjustment for Set Point(As same as 500/8D)) Selection and Installation (As same as 500/8D) Accessories (As same as 500/8D)
