This machine is on the basis of the general version of acrylic forming machine other with the function of pressing, pushing and sucking. The features of it is descripted below: 1. As the funtion of pushing, sucking and clamping the acrylic board automatically. Words in super high size and workpiece are available. 2. To suck in the heating box. Sucking the heating the whole acrylic board is available, which is to guarantee the forming quality to be better. 3. To shift automatically. Opening the door of heating box, shift from front and back. All the procedures are control automatically, and easy to operate. 4. To work more easily, as adding a tool to clamp the board and mould and no need use gummed tape to cover any longer. 5. To shift the platform, which is conenvient for sucking the words in high size. 6. To control the time and temperature automatically and easy to operate. 7. Single mould sucking, saving material and labour when manufacture the mould. Putting the acrylic board directly above the mould which is on the machine, and then heat up, soften, sucking and cooing. And shape up automatically at one time. 8. Automatical control, thermostatic sucking, accurate temperature, and acrylic material can be reused. Without defect, fast speed and saving time and power. 9. Without external mould limitation. Thinner boards are available, which is saving cost. 10. Easy and accurate to fix the mould's pisition. Smaller words are available and without waste. 11. No mechanical creasing on the working procedure, which is good for the products edge smooth and make sure the overall intensity of the products.
