Drill Press 9400
Infinitely Variable Speed
Features
Variable speed from 0 to 1200 rpm
Adjust speeds while operating in the material
High torque at low rpm speeds
Instantaneous reversing for tapping
Tapping head is not needed
Machine tap goes into ball bearing chuck
Can tap either left or right handed threads
Drill head and table rotate 360° around column
Smooth operating table raiser
Fully enclosed spindle
Quill lock and depth control
Same ball bearing chuck holds both drill and tap
Speed control
Continuous speed adjustment while in operation
Instantaneous reversing for tapping
One turn on knob for adjusting speed (0 to 1200 rpm)
Specifications Ellis 9400 Drill Press
Motor 2 HP A.C. single phase-choose 110/220
Control box Infinitely variable speed with a turn of the dial
Instantaneous electronic reversing
Full torque at low speeds
All solid state circuitry
Continuous speed adjustment while in operation
Spindle speeds 0 – 1200 RPM
Drills to center 18 1/8”
Drilling capacity steel 1 1/16”
cast iron 1 1/4”
Tapping capacity 3/4”
Morse taper No. 3
Quill diameter 3”
Column diameter 4”
Spindle travel 5 3/8”
Spindle to table (max.) 27 1/4”
Spindle to base 46 1/4”
Shipping weight 675 lbs
Table production type:
t- slotted 15 7/8” X 17 7/8”
2 Slots for 1/2” t-bolts
ground working surface
coolant trough
Base t- slotted
16 3/8” x 26 5/8”
2 slots for 1/2” t-bolts
ground working surface
Size height 69 1/2”
width 20”
depth 29”
Options power down feed (500.00 OPTION FREE NO CHARGE)
ball bearing chuck (ADD $100)
drill press vise (ADD $140)
