I.: Usage: The machine is designed to cooperate with the sheeting mill to take up the rubber sheet from it, and used for cooling drying cutting (or without cutting) and then folding the plasticated or mixed rubber sheets II.: Features: 1. Take off device is of the ring type conveyor belt with guide strip and without any union or joint, and equipped with printer. Take off conveyor belt, lifting and dip in wire mesh belt all share one same frequency conversion AC speed regulating motor, which the conveying speed could be adjustable. 2. Lifting bar is driven by one set cycloid pin wheel speed reducer through AC frequency conversion and the bar sheed is synchronous as the speed of lifting device. 3. The sheet is uniformly coated with the lubricator by dipping without polluting the environment. Its cooling effect is better than the spraying. 4. The hanging up area is fully closed, which adopts the blower to blow the sheet at a slant. So it improves the air flowing direction and cooling effect III. Technical specifications: Model xpg-800 Max width of the sheet: 800mm Thickness of the rubber sheet: 10mm Distance between the hanging bars effective: 150mm Max. Pendant length of hanging sheet: 1500mm Take-off linear speed: 0-26m/min Swing linear speed: 0-40m/min Hinge linear speed: 0-1.55m/min Number of cooling fans: 8sets Power of cooling fans: 0.75x8set Final temperature of the sheet: <&=40degree Compressed air pressure: 0.4-0.6mpa Overall size: 9500x1880x3100mm Weight: 11500kg
