Platinum cured silicone rubber for tire mold

Platinum cured silicone rubber for tire moldDescription of platinum cured silicone rubberplatinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber with mixing in 1:1 .It is mainly suitable for tire molds making .Advantage of platinum cure silicone rubber for tire mold1)Non- shrinkage2)high tensile and tear strength with high copy times3) exceptional fluidity and good operability (mixing ratio at 1:1 )4)high temperature resistant in 250 Centigrade Operation instruction of platinum cure silicone rubber for tire mold Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.Step Two: vacuum pumpingWithout exception, this step takes less than 10 minutes.Note: The time for vacuum-pumping should be less than 3 to5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.Step Three: Pouring the mixture into the frame with original mold slowly . Shelf life for silicon rubber for mold making8~10months, when stored in a dry & cool place under the room temperature 25.Packing for silicon rubber for mold making20kg/drum for part A+ 20kg/drum for part B in one set ,200 kg/drum for part A+ 200kg/drum for part B in one set For more information , pls feel free to contact Ms Omiga office no. :0086-755-89948294Mob:86-13760249425Skype: omigagoEmail :hyjw(at)szrl(dot)net Welcome to our website www dot szrl dot net