two component Platinum Cured Silicone Rubber

1.Applications of Factory sell two component Platinum Cured Silicone Rubber:two component Platinum Cured Silicone Rubber with FDA certificate is primarily intended for food grade products moldmaking, such as baby nipples, chocolates molds, cake molds, ect.It can also be used for adult toys making, sexy dolls, dildos, etc. plaster casting, resin casting, polyester casting, wax casting, gypsum casting, cement mold casting, silicone soap mold making, silicone candle mold making as well as low-melting point alloy crafts casting.2.Features and Properties of Factory sell two component Platinum Cured Silicone Rubber 1.Platinum Cure Silicone Rubber for Mold making 2.1:1 simple mix 3.Low shrinkage 4.With FDA certificate,specially for chocolate mold, faux food mold, silicone fuit mold making.3. Introduction/Description of Factory sell two component Platinum Cured Silicone Rubber :Platinum Cure Silicone Rubber For Silicone Mold Making is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation and low shrinkage.ModelHY-E625# AppearanceTranslucent Mixing Ratio 1:1 Operating time (Mins 25°C) 30 - 50 Curing time (Mins 25°C) 120 - 240 Curing time (Mins 60°C) 20 - 30 Hardness (A°) 25±2 Density ( g/cm 3 ) 1.08 Viscosity (CS) (Part A) 30000 ± 5000 Viscosity (CS) (Part B) 5000 ± 500 Viscosity (CS) (After mixed) 10000 ± 2000 Tensile-strength( kgf /cm2 ) 55± 5 Tear-strength (kgf /cm2 ) 15 ± 2 Elongation-break(%) 500 ± 50 Retractility(%) ≤0.1 4.Why does the silicone rubber mold have few molding times? The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products. Minimum Order Quantity: 200 KilogramPackaging Details: 25kg/drum and 200kg/drumDelivery Time: within 3 days after payment confirmed in our bank.Payment terms: L/C, T/T, Western Union