Smart CMS Compatible Alarm Security

Communications:1. Can set 6 voice alarm receiving phone #, 2 for CMS, 4 for private alarm receiving.2. Alarm type auto identify: After alarm triggered, LCD screen will display alarm zone #, alarm type, alarm icon and when it is connected to CMS, panel will report details of alarm to CMS.3. Compatible with CMS: Support Contact ID, Ademco 4+2 protocol.4. Remote Control: Enable to arm, disarm, listen to the spot, trigger siren and appliance etc via tel phone remotely.5. Vandal-proof function: If try to cut off the wire between wired detector and panel or cut off the tel line which connect to the panel will make alarm.6. Anti-tamper function: When someone try to remove panel deliberately, panel will make alarm immediately.7. Timing arm/disarm: Enable to set 4 group timer to arm/disarm.8. Timing testing: At preset time, panel will send signal to CMS to test the panel on-line status.9. Siren: The panel is with built-in siren and can enroll extension wireless siren. Both can be settled on/off when alarming.10. Wired/wireless zone real time monitoring: active the real time monitoring function, then if zone with trouble when doing arm/disarm operation, the panel will indicate zone fault.10. Can be connected with alarm repeater to prolong the wireless receiving distance.11. Tel-line off and wireless transfer function: panel make alarm or under arm status, but find out that tel-line off, panel will send signal to preset neighbour panel and the neighbour panel will report alarm instead. Automations:1. With voice indication all around the operation.2. LCD screen text and diagram display.3. Total 32 wireless zones, each zone enable learning code automatically or enter code manually on the keypad.4. Total 8 wired zones and can be compatible with N/O or N/C detector or sensor.5. Enable enroll total 8 wireless remote, wireless door bell, and unlimited quantity of one way wireless siren.6. Zone programmable: Each zone can be set as delay, instant alarm and can be modified.7. Enroll wireless device: wireless detector and remote address code can be enrolled automatically or manually and separately or simultaneously.8. Clock and event list: with built-in clock, can be set according to local time.9. Status inspection function: Enable record and inquiry 120 alarm event message including anti-tamper alarm, detector alarm, tel-line off alarm, arm/disarm, system setting, low battery alarm. And also can inquiry the zone number and alarm type.10. Password operation: Administrator password is for system programming and setting. User password is for commen operation. Both passwords can be modified.11. 4, 5 or 6 digits user code can be set for central monitoring system.12. Voice indication volume enable to adjust on the switch.13. The build-in siren can be set enable or disable when emergency key on the panel or remote is pressed.14. During the alarm receiving procedure the user should enter 4 digit user password to enter. This avoid others without permission to operate the panel.15. Zone type: robbing alarm, thief alarm, gas leak alarm, ambulance alarm, self-defined alarm, fire alarm and boundary alarm.