Flexographic Printing Machine This is a kind of novel and practical medium printing machine. 1. It adopts programmed control system and meter counter. One working length is setup on the control panel, after got to the setup data, the machine will automatically stop and alarm 2. It adopts famous brand frequency inverter to control AC motor with stable function. 3. It adopts pneumatic lifting system for printing cylinder. 4. Start in lower speed and full loading. WHen lifting or reducing speed, the tension is stale and low noise. 5. Anilox roller with the material has a full touch when in high speed. It has an advantage of high registration and stereo perception. 6. It adopts special oblique gear and printing size is in high precision. 7. The transmission roller is from Taiwan. It has balance treated and smooth run. 8. It adopts recycle air system which is made up of air blower, air sucker and thermal heater, and it adopts automatic temperature section control. And the cooler is available. 9. It adopts hot air blower and cold air blower for fast ink drying simultaneously. 10. Each printing unit has a clutch and seperate registration system with easy operation. 11. It adopts EPC for material edge tracking to achieve a good smooth rewinding. 12. It adopts double position unwinding/rewinding stand to realize non-stop exchange Main Technical Parameters: Model Printing Width (mm) Printing Length (mm) Printing Speed (m/min) Plate Thickness (mm) Overall Dimensions (L*W*H) (mm) JT-2600 600 180-1200 80 2.38 2300*1600*2200 JT-2800 800 2300*1800*2200 JT-21000 1000 2300*2000*2200
