| Interface Coaxial Switches Designed primarily as interface coaxial switch for a mobile phones, they are also used in variety of other applications requiring redirecting of signals when mating with corresponding plug. The mating action redirects the signals from the receptacle side to the plug side. FEATURES 1. Small board surface solder The area is 5.3 x 4.3 (excluding leads) 2. Low profile Low protrusion of only 6mm above the mounting surface (receptacle) 3. Light weight Weight is only 0.24g 4. Durability High durability (mating/unmating) of 10000 cycles. 5. Frequency range Can be used from DC to 2.5 GHz and with GSM, PCS, CDMA, etc. 6. Automatic mouting The embossed tape packaging specification of the receptacles permits automatic mounting. 7. Plugs Wide variety of mating heights are available. 8. Reflow Designed to counter flux wicking. MATERIALS Part Material Color/Finish UL Standard Outer Shell Brass Gold plating Insulator Ployamide resin UL94HB Common contact Beryllium copper Mounting area : Gold over Nickel plating Contact area : Gold over Nickel plating Board circuit side(N.C) contact Phosphor bronze Mounting area : Solder over Nickel plating Contact area : Gold over Nickel plating Other : Nickel Plating Product Standard Nomally closed Nomally open Operating temperature range Brass - Rated power 4W 4W Operating frequency DC~2.5GHz DC~2.5GHz Insertion Loss Max 0.3dB (DC~1GHz) Max 0.4dB (1GHz~2GHz) Max 0.5dB (2GHz~2.5GHz) Max 0.3dB (DC~1GHz) Max 0.4dB | 
