Ergonomically designed, all steel construction, left hand drive cabin with adjustable seat that is fully thermal and noise insulated. Instrumental panel with gauges. Warning and indicator lamps. All controls and levers are located for ease of operation. Automotive safety glass all round for maximum operator protection.Main Specifications of BG- D20 Model KBZK D20 N.V.W 16000kg Payload 20000kg G.V.W 36000kg Overall dimensions(LxWxH) 7365x2909x3110MM Wheel bass 3600mm Track Front:2382mm Rear :2070mm Top speed Direct drive:38km/h Over drive: 50km/h Max.gradeablity 29% Min.turning radius ≤8.5m Engine Model Cummins NT855-C250 Max.power 186Kw/2100r/min Max.torque 1019Nm/1300r/min Clutch 14''Double-plate dry clutch Transmission Fuller 8JS 118C Gear 1 2 3 4 5 6 7 rev Drive Ratio 8.03 5.32 3.36 2.54 2.39 1.58 1 8 Drive axle With wheel hubs reductions Total ratio:13.78:1 Steering Model:GX110C Working pressure:14MPa Brakes Double circuits,pneumatic control brakes system working pressure:750KPa Body hoist Tipping and falling time of body≤20sec. Body capacity Struck:10.7 m 3 Heaped(SAE2:1):13.9M 3 Tyres: 14.00-24 Electrical system voltage 24V ENGINE Model: Cummins NT855-C250Bore x stroke 140x152mmTotal displacement 14LMax. power 186Kw/2100r/minMax. torque 1019Nm/1500r/min CLUTCH Double-plate dry clutch(mm) 14" TRANSMISSION 7 forward and 1 reverse.Fuller manual transmission FRONT AXLE Heavy-duty seamless tube welded.Toe-in (0-3) mm DRIVE AXLE Double reduction,full-floating axle shaft.Cast-steel axle housing.Central reduction ratio 4.14:1Epicyclic reduction ratio 3.33:1Total ratio 13.78:1 STEERING Hydraulic assisted power steering BRAKES 2 independent circuits,pneumatic control brakes system internal expanding drum brakeDouble pneumatic disengaged spring applied,parking brake SUSPENSION Semi-elliptic leaf springs with rubber bumper.Front suspension has individual absorbers. BODY HOIST Twin three stage double acting cylinders mounted on the outer chassis frame.Max. working pressure 8336KPa FRAME Fabricated from high tensile steel .L-section beam withL-section reinforce members at the center. CABIN Ergonomically designed,all steel construction,left hand drive cabin with adjustable seat that is fully thermal and noise insulated.Instrumental panel with gauges.warning and indicator lamps.All controls and levers are located for ease of operation.Automotive safety glass all round for maximum operator protection. DUMP BODY Rock-type,high-tensile steel plate-welded body with exhaust heating,Side plate and under floor ribs are manufactured from high yield point steel. TYRES Model of tyre 14.00-24Rim size 10.0-24Tyre pressure (650±50)KPa ELECTRICAL SYSTEM Single cable,negative ground,voltage rating 24V.
