Our Bulk Cement Truck has a wide range of series from 10000L ~ 40000L capability. The engine model is CUMMINS, STYER, MAN, etc. The standard is Euro 2 and Euro 3, and we can offer to different customers with different options according to the market situation and customers' demand. Some of our Bulk Cement Truck models have ISO, CCC or other important certificate. We are exporting our Bulk Cement Truck to Africa, Mid-east, and South Amercian countries. All these Bulk Cement Truck are winning great reputation due to the solid quality timely after service.Engine ISLE310 30 (Cummins) 310HP(41M3) Type: Four-stroke, water-cooled, in-line, dry-liner , direct-injection, Max. Power: 228kw/2100rpm Max. Torque: 1200N.M/1200rpm No. of cylinder: 6 Bore x Stroke: 114*145 Displacement: 8.9 Controller type ELECTRICAL Transmission Wheels & Tires Model: 9JS119 1st :12.11 / 2nd:8.08/3rd:5.93/4th:4.42/5th:3.36/6th:2.41 7th:1.76/8th:1.32/9th:1/Reverse:12.66 Axles Front: Stub axle with double T-cross section Capacity: 7,500KG Rear: Single reduction with hub reduction and final drive ratio: 5, 73 Capacity: 13,000KG Brake system Service: Full Air Brake, Dual circuit Parking: Spring actuator at rear wheels Auxiliary: exhaust brake Fuel Tank :Mounted on offside of the frame Capacity: 380L Material: galvanized steel Steering Driving position: left hand drive Type: recirculation ball with integral power assisted by oil Suspension Front suspension: tapered leaf spring 9 semi-elliptic leaf spring Rear suspension: tapered leaf spring 12 semi-elliptic leaf spring Clutch Type: Hydraulic control with air assisted Plate diameter: dry single plate with diaphragm outside diameter: 430 mm Dimensions (mm) Overall dimension 11980X2500X3700 tenker dimension 8300×2,300×2,300 Kerb mass 15,000kg Number of axle 4 Tread (mm) 2,065/2,065/1,860/1,860 Wheelbase (mm) 1,850+4,605+1350 Min.ground clearance (mm) 255 Crew 3 Payload Axle load: Front: 7,500kg Rear:13,000kg Payload 25,000kg GVW 41,000kg Electrical System Batteries: 2*12 Volt – 150 AH*2 Alternator: 24 Volt/70A Starter: 24 Volt/7.80kw Calculated Performance Max. Speed (km/h): 85 Max. Grade ability (%): 30 Min. turning radius (m): 10 Type: Parallel, tapered channel section type with Reinforcements, stiffeners and cross members
