Truck Crane-A6 (40t)

Product name: Zoomlion QY40V532 The truck crane, with spacious cab and luxurious equipments, adopts full slewing system, telescopic boom, hydraulic proportional control system and self-made full-width special purpose chassis with four axles. 8× 4 drive and hydraulic power steering mechanism provides the crane with good driving performance and flexible steering. The system with latest load feedback hydraulic operated proportional directional control valve and quadruple gear pump, and the safety devices fitted in hydraulic system, such as relief valve, balance valve, hydraulic lock and brake valve etc., prevents the oil line from overloading and the accidents caused by oil pipe breakage to makes full use of the working capacity of each actuating mechanism. Thus the reliability and safety of the crane are increased. The safety devices such as load moment limiter, and the complete lighting system equipped in the crane ensure your safety during operation and are convenient for night workItem Value Remarks Working performance specification Max. rated total lifting capacity kg 40000 Max. load moment of basic boomkN.m 1430 Max. load moment with max. main boom lengthkN.m 800 Max. lifting height of basic boomm 12.0 Max. lifting height of main boomm 41.7 Deformation of boom is not taken into consideration. Max. lifting height of fly jibm 56.4 Working speed Max. speed of single rope on main winchm/min 130 The 4 th layer of drum Max. speed of single rope onauxiliary winchm/min 80 The 2 nd layer of drum Derricking time of booms 40 Telescopic time of booms 80 Slewing speedr/min 0-2.2 Traveling specification Max. traveling speedkm/h 70 Max. gradeability% 30 Min. turning circle diameterm 24 Min. ground clearancemm 280 Limits for exhaust pollutants and smoke Comply with related standards GB3847-2005 GB17691 -2005(Stage III) Oil consumption per hundred kilometers L 48 Mass specification Deadweight of crane in traveling conditionkg 37000 Complete vehicle kerb masskg 36870 Front axle loadkg 13700 Rear axle loadkg 23300 Dimension specification Overall dimensions (L×W×H)mm 13060×2750×3560 Base on outriggers m 5.60 Distance between outriggersm 6.90(fully) Main boom lengthm 10.9~41.0 Main boom angle° -2-80 Fly jib lengthm 9 ,15 Offset angle of fly jib° 0 , 30 Chassis Model ZLJ5414 Class II Engine Model WP10.290 QSL 325 Rated powerkW/r/min 213/2200 242/2100 Max. output torqueN.m/r/min 1160/1200-1600 1424/1500