LED Display Module Pouring Machine (ZH-200)

Mixing Ratio: 20: 1, 10: 1, 4: 1, 2: 1 or other constant ratio, adjustable. Mixing method: Motional Operation area: 700*700*30mm (Customised design is available on request) Motion precision: ± 0.01mm Motion speed: 0-60m/min Programming control: Enable Size of the whole machine: 1220× 1050 X1500mm Motor output of storage can A: 3.2CC/rotation Motor output of storage can B: 1.2CC/rotation Storage capacity of can A: 25L Glue A output ratio: 0~5L/min Glue A output bias: ± 0.02ml Storage capacity of can B: 10L Glue B output ratio: 0.02-3L/min Glue B output bias: ± 0.02ml Glue output rate: 10~60g / 5 seconds Output air pressure: 0.5_0.65Mpa (0.5_6.5kgf/cm2) Compressed air input: 0.5-0.7mpa Power consumption: 600W Power supply: AC220V± 10%, 50Hz Component list PLC and 7.2 inch touching screen Servo motor: YAKO, made in Japan Mixing motor: Panasonic Flow measuring meter: TILL, made in Switzerland Gluing speed Take P16 (256*128) as an example, normally ZH-200 takes 9 seconds to fill up glue for one module, so put that in calculation, this machine can fill up glue for over 2400 modules per day. Suitable glue All liquid glue, AB glue, epoxy resin... Equipment power and compressed air supply: Input power: AC 240V± 10%, 50-60Hz with earthing connection Input compressed air: 0.5~0.6Mpa