Grinder Mill (HGM Series) - Micro Powder Grinder

The three-rings and Medium-speed micro powder grinder is using the latest technological advances in grinding equipment, the three-rings and medium-speed micro powder grinder is widely used in grinding barite, limestone, kaolin, ceram, and slag, etc. Three-rings and medium-speed micro powder grinder is not different from other micro powder grinder. The three-rings and the rolling pressure ration of Medium-speed micro powder grinder is 1.2 times higher than that of the raymond grinder under the same power condition and the production output is raised to substantial degree. When a certain degree of wear of roller and ring of the Three-rings and Medium-speed micro powder is effected, The three-rings and Medium-speed micro powder is recommended to adjust the length of the spring to maintain the constant pressure between the roller and the ring. As a result, The stable output and fineness of the three-rings and Medium-speed micro powder are ensured. Models: HGM60; HGM80; HGM100 Model: HGM60 Diameter (mm): 600 Piece of roller: 15 Feed size (mm): ≤10 Fineness of power (mm): 0.005 - 0.045 Capacity (kg/h): 350 - 2500 Total power (Kw): 37 Weight of main frame (with motor) (t): 5.2 Model: HGM80 Diameter (mm): 800 Piece of roller: 21 Feed size (mm): ≤10 Fineness of power (mm): 0.005 - 0.045 Capacity (kg/h): 600 - 4000 Total power (Kw): 55 Weight of main frame (with motor) (t): 7 Model: HGM100 Diameter (mm): 1000 Piece of roller: 27 Feed size (mm): ≤10 Fineness of power (mm): 0.005 - 0.045 Capacity (kg/h): 900 - 6000 Total power (Kw): 90 Weight of main frame (with motor) (t): 9.5 Notice: Any change of TGM Supper Pressure Trapezium Mill technical data shall not be advised additionally.