Semi-Auto LED Stencil Printer T1200LED

1. Introduce: T1200LED is the most economy with high precision semi-auto stencil printer, especially for LED flexible strip production. PCB is fixed on the flexible work table, which is suit for single board and double board. PCB position adjust, work table removing, the rise and fall of scraper are controlled by frequency conversion motor. Can make sure the moving accuracy and high repeated accuracy. It's the best choice for LED production. 2. Feature: 1. Adopt Japan precision motor and liner guide way to make sure scraper more stable. 2. Double scraper printing, can adjust the corresponding cylinder precision throttle to set the scraper speed by pressure, which can avoid the resonance occur. 3. The scraper can lift up 45C and be fixed, easy to install and upload the scraper and clean stencil 4. The scraper can move forward and be fixed, with stencil position, can get best printer effect. 5. The printing work table and the stencil are spacing level, with microadjust. 6. The Mechanical arm can adjust between right and left to suit for 650mm-1200mmPCB 7. Combined print platform has grooves and position PIN, and simple setting, rapid replace, and is suitable for the single substrate and double-sided substrate production operation. 8. Proofreading arm (stencil) moving and printer (platform), X, Y, Z can quickly proofread and adjust actually. 9. Electronics motion adopts microcomputer PLC controlling, touch screen control and can free to chose single printing /double printing, manual and automatic mode. 3. Specification: 1)Max printing PCB size (X*Y): 1200*300mm 2)Printing plat flam: ( X*Y): 1220*350mm 3)Max stencil size (X*Y): 1300*550mm 4)Min stencil size (X*Y): 330*370mm 5)Micro adjust range: XY, 10mm, θ Angle; 30C 6)Voltage: Single phrase AC220V, 50Hz 7)Demission MM): 1850*890*1760