Syringe Pump (KL601)

Product Description Technical Specifications 1. Compatible with syringes 10ml, 20ml, 30ml, 50ml (In order to ensure injection accuracy, please choose the syringe recommended by us, otherwise, please contact our after-sales technician and calibrate the accuracy under their guidance. ) 2. Injection speed: 0.1-1300ml / h Specific velocity classified as follows: 10ml syringe 0.1 ml/h--300 ml / h 20ml syringe 0.1 ml/h--600 ml / h 30ml syringe 0.1 ml/h--900 ml / h 50ml syringe 0.1 ml/h--1300 ml / h 3. Injection error: Accuracy error: ± 2% (including mechanical error of ± 1%) 4. The total amount of pre-injection: 1-50ml 5. Blocking sensitivity: Devided into into three levels: L (Low): 0.03Mpa --- 0.05 Mpa M (Middle): 0.05 Mpa --- 0.07 Mpa H (High): 0.07 Mpa --- 0.09 Mpa 6. KVO: When the preset volume of injection is completed, the pump automatically converted to KVO flow rate of 0.1ml / h. 7. Power Supply Voltage: AC: 220V ± 22V 50Hz ± 1Hz DC: 9.6V ± 1.6V 8. Power Consumption: Less than 18VA 9. Built-in battery time: The pump will continuely for 3 hours at the rate of 30ml/h, under the condition that the battery is fully charged. 10. Work Environment: (1) Ambient temperature: 10 ~ 30 C; (2)Relative Humidity: 30% ~ 75%; (3)Atmospheric pressure: 860 ~ 1060hPa; (4)infusion pump should be in the absence of a strong vibration, no other liquid intrusion within the surrounding non-corrosive gas environment. 11. Dimension (mm) 245 × 120 × 115 (includes protrusions) 12. Weight: About 3kg 13. Security Category: I class and with internal power supply of the BF type of common equipment.