Deep Groove Bearings 6000zz/2RS

Characteristic of deep groove ball bearing: 1. Seal form: Open style, Z, ZZ, RS, 2RS, 2RZ 2. Bearing stop ring: N, NR 3. Class of precision: ABEC-1, ABEC-3, ABEC-5, ABEC-7 4. Vibration rank: V1, V2, V3, V4 5. Noise rank: Z1, Z2, Z3, Z465. 6. Internal elimination code: C0, C2, C3, C4, C5 7. Bearing material: Bearing steel (9Cr18), stainless steel(AISI440C, AISI304, AISI316), ceramics 8. Keeper: Stainless steel, PTFE, nylon 9. Bearing ferrule and ball hardness: 59 - 63HRC Deep groove ball bearing is the most commonly used rolling bearing. Its structure is simple, and it can be easy to operate. They are mainly used for standing the radial load. But when the radial play is increasing, they have the performance of angular contact bearing assembly. In that case, they may simultaneously stand the radial loads and the axial loads. In some cases, which are not suitable to using spherical roller thrust bearing and the rotational speed is rather high. They can also be used to stand purely axial loads. Compared with other kind of bearings with the same size, this kind of bearing enjoys smaller coefficient of friction and higher limits speed. But they cannot bear impact. Therefore, they are not suitable to bear heavy load. After installing the deep groove ball bearing in the axis, within the scope of radial play, we can limit the axial position of the axis and the outer cover. Thus they can be used in both directions as axis-position. Moreover, this kind of bearings also has some aligning ability. Being inclined 2"~10" comparing with outer cover, they can also operate normally. But, it has certain influence to the bearing life. The deep groove ball bearing can be widely used in automobile, tractor, engine bed, electrical machinery, water pump, agricultural machinery and fabrics machine.