| General description The HFDOM40P-xxxSx Series 40Pin flash disk module is a flash technology based with true IDE interface flash memory card. It is constructed with flash disk controller chip and NAND-type (Samsung) flash memory device. The HFDOM40P-xxxSx Series operates in both 3.3-Volt and 5.0-Volt power supplies. It comes in capacity of 8, 16, 32, 64, 128, 192, 256 MB and up to 384 MB formatted 40Pin type.By optimizing flash memory management, the life of this HFDOM40P-xxxSx series can be extended to its maximum level. Because the ECC function is included, the correctness of data transfer between the HFDOM40P-xxxSx series and a True IDE compatible interface device can be guaranteed. The HFDOM40P-xxxSx series is fully compatible with applications such as CPU card / board, set top box, industry / military PC / Notebook, security equipment, measuring instrument and embedded systems.Features True IDE compatible host interface Direct plug in for 3.52 IDE connectors 40 pin 2.54mm IDE connector Very high performance, very low power consumption Automatic error correction| Support 3 power save mode: stop/idle/active Support for CIS implemented with 256 bytes of attribute memory 3.3V/5.0V operation voltage Host data transfer rate: 20MB/s Flash data transfer rate: 10MB/s Host Interface bus width: 8/16 bit Access Flash Interface bus width: 8 bit Access Capacity: min. 8MB ~ max. 384MB MTBF: 1,000,000 hours, minimum 30,000 insertions Operating vibration: 15G peak to peak maximum Operating shock: 1,000G maximum | 
