Mini Electric Diaphragm Pump (DP005)

- High reliability, low noise, small vibration - Temperature 100degree c - Both pumping water and air Technical data: Voltage: 12/24VDC Max. Fluid Temperature: 100 ° C Duty Cycle: Intermittent Unit Size: 1140*80*62mm Port Size: 59*Ø 5mm Inlet/Outlet Size: Ø 6.4mm Working life: Condition working above 800Hs Applicable Liquid: Water, oil or solution between pH 5-8 Following datas base on test by water Application: Sprayer, Water filter, Water purifier, Instant water heater, Ice maker, Coffer maker, Medical equipment, etc. Advantages: 1) Combined the advantages of self-priming displacement pump and chemical pump. Integrated structure of motor and pump. Completely isolated and amti-leakage. With favorable performance in oil resistance. Heat resistance and chemistry resistance. 2) Self-priming. Over heating protection. Stable running. No damaging under long time race. Small Size. Low noise and longevity of life. 3) Non-chemical seal, the product is ok for long time race, the built-in valve can preent flowing backwards. Prevent sputtering, heat exhaust from internal, free of external heatsink. 4) The pump body is made of anti-corrosive PP, the internal structure is madeof diversified synthetic rubbers to achieve best chemical adapt ability. 5) Available Voltage 12V/24V/36V/110V/220V, apply for independent pump chamber, self-priming lift reaches 12inches(370cm) 6) By adjusting the switch, the max output pressure can be improved by 30%50%, but it shouldn't be too high, otherwise, the rubber parts will be damaged or life will be shorted. Scope of application - This series products are widely supplied in universal equipments, medical equipments, chemical equipments, agriculture (lawn and garden), tourism vehicles, special purpose vehicles, ships, beverage equipments, car cleaning, - carpet cleaning, floor cleaning, water purifier and treatment