split water tank

Description (1)The place of installing the water heater must be closed to the place of using, the temperature / pressure relief valve, temperature controller and electric heat pipe must be faced the direction where is easy to maintain. The data plate should be easy to read, and the space above the tank should be over the height of the tank so as to check and change the positive pole protection device. (2)The space around the tank should be convenient when pulling down the whole tank to maintain or change the parts in case of necessity. (3)The tank is with vertical type; it must be installed in the level that can bear the weight of the product. (4)Power socket must be installed in the position that the water can’t spray, so as not to produce vapor when taking a shower, then induce the socket leak electricity. (5)When heated, it is normal phenomenon when there is a little water draining from the overflow/pressure relief valve.