Cone Ribbon and Screw Mixer (DSH)

Cone Ribbon and Screw Mixer (DSH): 1, Specification: See the table (Not all products are listed. For more, please contact with the sales engineering. ) 2, Discription: The material circles and rises under the operation of the outer ribbon mixer, while the inner reverse screw presses down the material along the shaft, which finishes the mixing. 3, Motor and decelerator: Three types of decelerator: Cycloid decelerator, worm gear decelerator, cycloid compound deceleration unit. (the normal type is cycloid decelerator). There are respective differences between the three types, so the choice of the decelerator depends on the application and customers requirement. Worm gear decelerator can realize the rotation and revolution respectively, first rotation and then revolution; The performance of the cycloid compound deceleration unit is steady to satisfy the serious requirement of full-loading revolution. 4, Raw material: Carbon steel, manganese steel and SS steel(304, 316L, 321). Choosing the suitable raw material will down the cost 5, Sprinkling/spraying device: When the liquid need to be added, we design the sprinkling or spraying device, which include nozzle and pipeline. There are types of nozzles, respectively different in shape, effect, current capacity. We can choose the suitable nozzle according to the different requirement. 6, Special full-loading: The nauta mixer structure can satisfy the rigor requirement of high density and high friction coefficient. 7, Installment: Suitable installment of nauta mixer can guarantee the convenient operation and clean production area. Certification: ISO9001, CE