KJZ10 Rapid Speed Mixer and Granulator This machine is imported the technology from Belgium, and self studied and manufactured. After several years using, and prove the machine capability can reach the introduced same type machine. The machine mainly used for pharmaceutical, foodstuff, chemical etc industry to produce granule products, it is high efficient equipment. The current technology is finished separately with mixing and granulating. It instead of horizontal mixer and oscillating granulator. Because of the machine is used in the sealed vessel one time to finish the mixing and stirring, granulating, it owns high efficient, rapid speed, sealing, mixing and granulating is finished in one time. Working efficiency is improved with the old technology of 4-5times. So the machine have the following characteristics refer to the two old granulator: 1. No powder dust to fly; 2. Content is even; 3. Granule distribution is even; 4. Improve working efficiency 4-5times; 5. Sticky material consumption obviously reduces, and then reduce the cost; 6. Because of one-time production, and then reduce the pollution; 7. Use 1Cr18Ni9T, especially the parts which contact with the medicine is 100% stainless steel and meet GMP requirements. Technical Data: 1. Volume: 10L; 2. Stirring slurry rotary speed: Slow speed; 470r/min; Rapid speed: 720r/min. 3. Granulating knife rotary speed: Slow speed: 1440r/min; Rapid speed: 2780r/min. 4. Overall size(LxWxH): 310x815x1258mm; 5. Weight: 180kgs; 6. Finished granule size: 10-30mesh can adjust; 7. Output: 1.5-3kgs/5-10min. KJZ50 Rapid Speed Mixer and Granulator The machine mainly applied for pharmaceutical, foodstuff, chemical etc industry to do granule high efficient equipment. In order improving the production capacity, it is efficient mixing This machine can stir and granulate in one time, and then improve the production capacity five times. Granule is even, meet GMP requirement. Operation is convenient, material-discharging have "lean angle position fixed device" and with material vehicle to improve the production efficiency. Main Technical Specifications: Granulating Speed: 20-30kgs/5-10min; Grain Mesh: 10-80mesh (can be adjusted); Stirring Double Speed Motor: YD16M-14/6P 4/5kw/380V Granulating Double Speed Motor: YD100L2 2/4P 1.1/1.5kw/380V Discharging Granule Motor: BWD8-35 4P 120W Lifting and Descending Motor: BLD15-87 4P 550W KJZ100 Rapid Speed Mixer and Granulator KJZ 100 Mixing Granulator(Hydraulic Elevator) is currently used worldwide in the general granulation technology. The granulating principle at the half-flowing state material being mixed in a airtight vessel. While adhesive poured into, with the help of the mixing arm, the material were pressed and rubbed so that formed liquid bridge into soft material, at the same time high speed rotary chopper cutting it distributed into even granules. Mixing and granulating, the two causes is finished in one airtight vessel, being avoid material powder flown upward and cross pollution. Then you can drop the vessel so that the mixing arm will be separated from the chopper and easy cleaning. Our HLSY 100B Mixing Granulator is the reasonable equipment for granulation accorded with the regulations of GMP. Main Performance and Characteristics: 1. There is no painting on the surface of the machine. The surface of the machine is coated with metal, so that it will not ped off and mould. 2. Equip advanced pour liquid system, the liquid divided into even, technology well repeat. 3. Pass spod use the form of filling gas sealed, it will avoid cross pollution. 4. Electricity control can be used automatic or manual
