LED Microwave Sensor Light (PS-ML08L-15W)

Features: 1, This is a microwave sensor switches controlled LED lights, the microwave sensor was built Into the lamp, it has 36PCS high brightness LEDs inside, with total power of 15 watts. 2, The work intensity of this product is twice as 60watt incandescent and the life exceeds 50, 000 Hours. The microwave sensor switch is a new type automatic switch that comes after voice Switch, and infrared sensor switch. 3, The detection way has the below advantages compared with other as follows: (1). Non-contact detection (2). Suitable for bad environment, immune to temperature, humidity, noise, air, dust, light^ (3). RF interference ability 4, Transmission power only 0.2 mW, It will not harm the human body. Simple installation+ easy wiring. We adopt this sensitive advanced sensor switchs in lighting control, enabling the light to turn on automatically when one comes, automatically turn off when one goes out In addition to the widely usage in the aisle stairs, living room and bedrooms, it also can be installed in the bathroom. 5, The built-in microwave sensor switch can penetrate plastic, glass, wood. So it can be installed in glass or plastic shell lamp This allows the application of microwave sensor switch in different styles of lights for energy control. Now, we can provide a variety of microwave sensor LED lamps to meet the needs of different people with different preferences. Specifications: 1) Power source: 220-240V/AC 2) Power frequency: 50Hz 3) Rated load: 15W Max. 4) HF system: 5.8GHz CW electric wave, ISM wave band 5) Transmission power: <0.2mW 6) Time setting: 6sec to 12min (adjustable) 7) Detection range: 1-10m (radii. )(adjustable) 8) Light-control: 10-2000LUX(adjustable) 9) Standby power: <0.9W 10) Detection angle: 360° 11) Luminous flux: 700lm 12) Installation height: 2.5-3.5m (ceiling mount) Lamp part: 1) LED quanlity: 36PCS 2) LED specifications: FM-5630WNS