car 3D logo door light, LED ghost shadow light, courtesy doo

DiscriptionInput Power: 3WOperating voltage: 8 to 28V DCOperation Temperature: -40C to +105Storage temperature: -40 to +125 ° CSize: Φ 18.5mm * 32mmWarranty period: 1 yearAdvantage:1. The car logo door light is specially designed for auto modification fancier; we purpose to bring more driving fun to drivers; 2. The dazzle logo light will display on the ground when you open the car door ,and will turn off when you close the door; 3. Major Reduction in, Heat Generation; 4. High ability of shock resistant; Brighter light; Low temperature 5. Super white lighting provides a high level of road safety at night driving; 6. It can be installed in both left and right door.Courtesy door light make your car artistic moreover the atmosphere; 7. Pure color with nice appearance. Installation InstructionThis product should be installed at the bottom of the door flame and make sure the Len vertical with the ground;1.Pull down the inside door board first. Mark the suitable location for drilling a hole;2.Drill the hole on the door board with our borer;3.Inset the product from the bottom of car door ,then arrange the power cord;4.Install the nut through the power cord upon the hole inside; Tighten the nut;5.Connect the power cord according to the installation guide;6.Adjust the lamp projection to the suitable place with wrench tool;7.Reinstall the inside door board,then check the final effect