J1118k(180ton) Horizontal Plunger Cold Chamber Die Casting Machine

Model J1118K(180 Ton) 1800KN Horizontal Plunger Cold Chamber Die Casting Machine&cold chamber die-casting machine&horizontal cold chamber die-casting machine&horizontal die-casting machine&casting machine Features and applications The machine is widely used for mass production of foundry goods from nonferrous metals such as aluminum, zinc and copper in various industries including automobiles, motorcycles, meters and instruments, household appliances, and daily-use hardware. The machine is equipped with programmable logic controller(PLC)and graphic operating terminal (person-machine interface) that are imported from Japan.The simple operating interface and proportional relief and flow control valves ensure easy operation of parameter and program setup.Die locking adopts crank expanding structure, 4-rod pilot elastic framework and has excellent rigidity.Advanced double-loop and 4-step hydraulic injecting system that is constant and effective;Maximum injection rate over 6m/s and minimum boosting time less than 20ms.The machine is superior in performance, and offers reliable and smooth operations.It owns trouble diagnosis and shooting function, and represents the leading technology in China. Traits of cold chamber die-casting machine: 1.Multi-stage pressure and speed control to mode-locked opening, it is equipped with low pressure locking protection function. 2.Hydraulic driver gear die regulating device. 3.Central electric lubrication system. 4.Rapid hydraulic ejecting device and core puller. 5.Three-section pressure and speed control shot.Piston type two-speed and supercharging & power accumulator. 6.Hammer automatic lubricating device.(optional) 7.Germany and Japan famous brands hydraulic elements(optional).Project unit J1118K Die locking force KN 1800 Size of moving platen (H×V) mm 720×719 Inner space between the bars (H×V) mm 480×480 Thickness of die block (Min.-Max) mm 200-580 Stroke of moving platen mm 385 Ejection stroke mm 85 Ejection force KN 109 Injection force KN 230 Injection stroke mm 350 Injection position mm 0,-70,-140 Diameter of shot sleeve mm 50,60 Dosage of fluid metal per shot (AL) kg 1.3,1.9 Injection Pressure (Min-Max) MPa 117,81.3 Max Projecting area of casting cm 2 221 Dry cycle S 7 Pipe line pressure Mpa 13 Motor power kw 15 Machine weight kg 7000 Overall dimensions (L×W×H) mm 5600×1280×2560