Slitting Saw Blade

Product Description Solid carbide slitting saw Outer diameter: 12 to 250mm Hole diameter: 2.0 to 70mm Thickness: 0.6 to 25mm Density: 14.40 to 14.95g/cm Hardness: HRA 90 to 93.5 Bending strength: 1, 960 to 2, 300MPa Used for cutting off and slotting metal materials such as plain steel, chilled steel, copper and aluminum as well as difficult-to-machine materials such as stainless steel, titanium alloys, and printed circuit board Compared with high speed steel metal saw, perform high speed milling, with high machining efficiency, accurate slot milling and good surface finish Solid carbide saws are made specifically to your order Design saws based on your job characteristics or will produce saws to your tooling sketch or drawings Range: Saw thickness: 0020 to 2, 500 inches Tolerance: 0.00005 inches Outside diameter: 250 to 10 inches Tolerances: 001 inches Solid carbide saws provide the optimum combination of: Maximum retargeting lifespan Maximum total tool life (up to 20 times high speed steel) Maximum cutting and production speeds Minimum cost per unit of production obtained from saw Maximum precision and finish of cut Maximum resistance to abrasion Maximum engineering design ability of saw thickness, OD, tooth form, number of teeth, clearance, and other specifications