QT4-15 Block Forming Machine is completely controlled by PLC system. By operating its computer interace, the random signal analysis, fault diagnosis and parameter setting-up of all kinds of materials can be achieved, easily. The material stock hopper and the material feeding hopper are separated, to each other, for the purpose of quantitative feed of materials, which can effectively control the advance liquidation of some concrete and reduce the feeding time. Its unique material-feeding device can quickly and evenly discharge the materials into the moulding box so that the weight error in finished products can be reduced to the minimum. For its frame structure, super-strong shaped steel bars are used; For its electronic and hydraulic systems, most the important elements are imported. So, all of these have ensured the stability and reliability of the machine in long term of operation. This machine has good applicability. It not only can be used for producing concrete blocks of high strength, but also for Pulverized Coal Ash bricks, Cinder Bricks, Mine Slag Blocks, and so on. Only by changing different moulds and dies, the hollow blocks and solid blocks of different specifications can be manufactured. Maim Technical Specifications: Product Quantity 400× 200× 200 4 pieces/mould 6000 PCS/8h 400× 150× 200 6 pieces/mould 8000 PCS/8h 400× 120× 200 8 pieces/mould 11000PCS/8h Vibration Frequency max. 4000r/m Power 29.4kw Electrical source 380V/50Hz Overall Size 3700× 1620× 2550mm Rated pressure 16MPa Cycle 18S Total Mass 6000kg Carriage Size 900× 550× 30mm
