Engine Parts

1) Production, High Pressure Casting 2) Material, Aluminum alloy ADC12 3) Surface finish, Polishing 4) Machining, Milling and Drilling 5) Casting Equipment, 1250T 6) Quality system, TS16949 available 7) Product Dimensions, 460MM x 230MM x 656MM 8) Product Thickness, Min 6MM Max 10MM Detail description: This product is the automotive engine cover. The main point of the quality requirement about this product is the density and surface mirror polished. As follow above requirements we choice the high pressure casting as the density of the product can be controlled effectively though the produce of the large-scale die-casting machine. As well known, only ensuring the density can guarantee the good state of mirror-polished. So we have the control procedures as follows, 1) First of all, it is the control of the raw material. We will take the spectral analysis and ensure the accuracy of the material. 2) We will conduct the first article inspection, inspection and the end pieces of test. We will detect the X-ray detector during the inspection process, and the testing standards according to ASTM E505A2. Now the most important control link is that the mirror polishing products could not be used feed back. We should use the 100% aluminum ingot. 3) It is the same as the inspection procedures in the production of machining processes. We can conduct the CMM(Coordinate Measuring Instrument ) and control the dimensions. 4) The method of surface control is product inspection before shipment by 100%. Lastly, I really believe that we can meet your requirements, as our professional and we are strict with the quality. If you are interested in any products of our factory, please send the detail drawing and samples of the products to us. We will offer you the most competitive price and perfect service.Alloy Code Chemical Composition (%) Si Cu Mg Fe Mn Zn Ni Sn The Sum of Other Elements 9.5-11.5 2.0-3.0 ≤ 0.10 ≤ 1.3 ≤ 0.50 ≤ 3.0 ≤ 0.50 ≤ 0.35 ≤ 0.50