GHL granulator machine

Working Principle The powder raw materials and adhesives in a cylinder container are fully mixed into humid at the bottom. Then it is cut into uniform granules by the high-speed crusher at the side. Features 1 The machine adopts horizontal cylinder structure. Its structure is reasonable; 2 Using air-filling seal shaft to drive. When washed, it can be changed to water;3 Ball-type granules, good fluidness; 4 Compared the traditional process, 25% of adhesive can be reduced and the drying time can be shorted; 5 The time of mixing in drying is 2-minutes each time, and the time of granulating is 1-4 minutes. Compared with the traditional process, efficiency rises 4-5 times; 6 In the same sealed container, the processing: dry-mixing and humidity-mixing and granulating can be finished. It’s conformity with the requirements of GMP; 7 The whole operation has strict safety and protective measures.