Special Structure: 1. Two sections type straightening device, it is no need to adjust straighten function when rolled material is under straightening process (from start to end). To ensure the material at same flatness completely. 2. Fine electric parts can not be finished with high accuracy only good smoothing of coil material may be accomplished. So thin materials need to be straightened, and stress moderately removed. 3. After straightening, materials can be curved upward or downward of flat easily. 4. As bearing of work rollers are of oil lubricating free type, there is no trouble of the adherence of oil or dirtly. 5. The driving unit is controlled by inverters (cycle control to feed smoothly at a speed synchronized with the press). Model DL-100 DL-200 DL-300 Width max. (mm) 100 200 300 Thickness (mm) 0.1-0.6 0.1-0.6 0.1-0.6 Arrange of work roll 20 3 /3+ 9 /10 up /down 20 3 /3+ 9 /10 up /down 20 3 /3+ 9 /10 up /down Adjusting type 4 point free standing type 4 point free standing type 4 point free standing type Feed speed 0-16M/min 0-16M/min 0-16M/min Motor(HP) 1/2HP 1HP 2HP Direction Left to right Left to right Left to right Power supply AC: 220V AC: 415V AC: 380V AC: 440V AC: 220V AC: 415V AC: 380V AC: 440V AC: 220V AC: 415V AC: 380V AC: 440V
