Model No: GBS-8219 C-5470YE Hitachi Monitor 8219 CNC Monitor Converter uses the latest technology to replace your old or damage industrial CRT Monitor with a common minitor. It brings you very good images in a low price. Input Signals MDACGAEGARGBRGB SogRGBSRGBHVYPbPr Interface 5BNC, 9pin3pin6pin14pin20pin25pin Horizontal Frequency Rate(H) 12kHz to 40kHz automatically recognized Output Supports D-15pin standard VGA/SVGA, Resolution: 800*600/60Hz, 640*480/60Hz Interface D-SUB 15 PIN standard VGA port Power DC 12V 1.0A Note: 1. YPbPr = YUV 2. Input Horizontal Frequency Rate 12kHz to 40kHz automatically recognized. 3. Support RGB and YPbPr 4. Support Interlaced Scanning and Line by Line Scanning. 5. Support Vertical Resolution from line200 to line 600 automatically recognized. 6. Support variable Horizontal Resolution automatically recognized. 7. Support RGBHV (separate sync), RGBS (composite sync), automatically recognized 8. Output resolution: 800*600/60Hz standard VGA or custom-resolution. MENU Use to adjustscreen /programming DC12 Power inputDC12V, 1A Table 4.1 Definition for Input Channel II: PIN InputSignal P1(GND) Connect to the ground P2(GND) Connect to the ground P3(R) Connect R(ED) interface of the input device P4(G) Connect G(reen) interface of the input device P5(B) Connect B(lue) interface of the input device P6 Undefined(null) P7 Undefined(null) P8(H) Connect H(CS) interface of the input device P9(V) Connect V interface of the input device Figure 4.1 Definition for Input Channel II Table 4.2 Definition for Input Channel I: BNC Input Signal Connection image PbYPr YPbPr input signal (right image) Interface: Three BNC slot, connected to the corresponding Pb, Y, Pr interface, then Y monochrome port. Figure 4.2 Analog 3BNC (YPbPr) Input. RGB RGB Sog input signal (right image) Interface: Three BNC slot, connected to the corresponding R, G, B slot, then G monochrome port. Figure 4.3 Analog 3BNC (RGB Sog) Input. RGBS RGBS CS Composite Sync (right image) Interfaces: 4 BNC slot, connected to the corresponding R, G, B, S I, monochrome then G, S I Figure 4.4 Analog 4BNC (RGBS CS) Input. RGBHV RGBHV separate sync (right image) Interface: 5 BNC port, connected to the corresponding R, G, B, H, V I, monochrome then G, H, V I Figure 4.5 Analog 5BNC (RGBHV) Input. Operation Menu: Item Spec. MENU -press it to enter into OSD menu -click it once to select and click again to exit the current line "+" -click it to move the cursor up -click it to add the value "-" -click it to move the cursor down -click it to deduct the value
