Self Aligning Ball Bearing 1205 |
|
Specification |
|
Design Units |
Metric |
Structure |
Ball Bearing |
Weights |
0.139kgs |
Cage Material |
Steel cage |
Material |
Chrome Steel GCR15 |
Ball Type |
Carbon chromium steel |
Seals Type |
Open |
Certificate |
ISO9001:2008 |
Advantage |
Prompt Delivery shipped within 72 hours; Bearings with an extended inner ring; Sealed bearings |
Number of Row |
Single |
Dimensions |
|
d-Bore Diameter |
25mm |
D-Outer Diameter |
52mm |
Precision Rating |
P5 P6 P4 P2 P0 |
Clearance |
C2 C3 C4 C5 C0 |
H-Total Width |
15mm |
1)Self-Aligning Ball Bearing has two kinds of structure:cylindrical or tapered hole, the cage material is steel plate, brass,etc.. Its characteristics is spherical raceway, with the natureof mind, can automatically adjustable to compensate concentration and shaft deflection caused by error, but the inner and outer rings relative inclination shall not be more than 3 degrees.
2)Self-Aligning Ball Bearing can bear larger radial load,but also can withstand axial load. This kind of bearing outer ring raceway is spherical shape, so it is self-aligning performance,when the axial force bending or tilt the inner center line and center of the outer ring line relative slope up to a maximum of 1 to 2.5degrees bearing can still work.
3)Taper bore of 1:1 2 or 1:30. In order to strengthen the lubrication performance of the bearing, the bearing outer ring of the oil groove and the processing of three oil hole.
4)Self-Aligning Ball Bearing is applied to withstand heavy load and impact load, precision instruments, low noise motor, automobile,motorcycle,