Sizes: OD(219-3200MM), WT(5-30MM)
Standards: AWWA C200, ASTM A139, and ASTM A252
Features:
Allowable yield strengths up to 70,000 psi
Fittings and fabrications to support nearly unlimited joint or body configuration
Field-welded and rubber-gasket joints
Butt-welded joint configuration available with machine-beveled ends
Joint lengths up to 55’ (nominal) for AWWA C200 and ASTM A139; lengths up to 80’ for ASTM A252
Pipe End:
square ends (straight cut, saw cut, and torch cut). or beveled for welding, beveled.
Surface:
Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy, Fusion Bond Epoxy, 3-layers PE)
Packing:
Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips, Plastic caps.
Test:
Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield, strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.
Production Process
Equipment
SSAW pipe is made of hot rolled coiled steel by automatic submerged arc weld under normal atmospheric temperature. There are 12 sets of modernized production line of SSAW pipe. The annual yield of SSAW pipe with outside diameter 219mm-3620mm, wall thickness 5-25.4mm and steel grade B-X80 is 1,000,000 tons. its two steel pipe production lines, one for spiral submerged arc welded (SAW) steel pipe and one for longitudinal submerged arc welded (SAW) steel pipe, are respectively comprised of two sets of main machines and 1 set of sizing equipment. The annual output comes to 120,000 ton for spiral SAW pipe and 200,000 ton for longitudinal SAW pipe.