Liquid Molding silicone rubber/(RTV) silicone rubber application
liquid molding silicone rubber is suitable for industries such as toys, gifts, furniture decoration, construction decoration, stationery, resin crafts, unsaturated resin crafts, poly resin crafts, candle crafts, plastic crafts, plastercrafts, artificial plant and animal crafts, Buddhist statue crafts.
liquid molding silicone rubber is suitable for industries such as toys, gifts, furniture decoration, construction decoration, stationery, resin crafts, unsaturated resin crafts, poly resin crafts, candle crafts, plastic crafts, plastercrafts, artificial plant and animal crafts, Buddhist statue crafts.
Liquid molding silicone rubber/ (RTV) silicone rubber features
a) Good characteristics of easy-operation
b) Good flowability and light viscosity
c) Low shrinkage
d) No deformation
e) Favorable tension
f) Favorable hardness
g) High temperature resistance, acid and alkali-resistance and aging resistance
Liquid molding silicone rubber/ (RTV) silicone rubber descript ion
Tin-based silicones, also called condensation-cure silicones, are two-component materials which cure at room temperature(RTV)to flexible, high tear-strength rubbers. Tin cured silicones can be poured onto models or they can be made brushable by adding a thixotropic additive. They are ideal for molds where easy release or high temperature resistance is required. Tin cured silicones can be used for casting polyurethane, epoxy and polyester resins, waxes, all gypsum products and low-temperaturemeta ls. Our tin-cured silicone systems are the most economical. They are best used for casting resins and low melt meta ls.
Tin-based silicones, also called condensation-cure silicones, are two-component materials which cure at room temperature(RTV)to flexible, high tear-strength rubbers. Tin cured silicones can be poured onto models or they can be made brushable by adding a thixotropic additive. They are ideal for molds where easy release or high temperature resistance is required. Tin cured silicones can be used for casting polyurethane, epoxy and polyester resins, waxes, all gypsum products and low-temperature
Liquid molding silicone rubber/ (RTV) silicone rubber instruction
During operate the three
1. weigh theliquid silicone rubber and curing agent exatly
2. Stir theliquid silcone rubber and curing agent evenly
3.we shouldchoose the right hardness to making diffirent size of product mold
Liquid molding silicone rubber/ (RTV) silicone rubber Datasheet
Model
|
HY-635
|
Appearance
|
white
|
Mixing proportion of curing agent (%)
|
3%
|
Operating time (mins 25 0C )
|
30-45
|
Curing time(hours 25 0C)
|
6-8
|
Hardness (A°)
|
35±2
|
Density ( g/cm3)
|
1.08
|
Viscosity (mPas -25 0C)
|
28000±3000
|
Tensile-strength(kgf /cm2)
|
≥49
|
Tear-strength (kgf /cm)
|
≥27
|
Elongation-break(%)
|
≥ 530
|
Any questions of mold making silicon rubber, please feel free to contact Ms Sabrina
Tel: +86-755-89948006
Fax:+86-755-89948030
Mob: +86-18938867533
Email:hyse@szrl.net
Skype: sabrinapeng0601