Main Features 1Adopt liner slide which makes XYZ axis all can do precision adjustment and fast positioning. 2High-precision temperature controller, built-in PC serial port, external sensor, can be controlled by computer. Temperature parameters can be setting and running on the computer. 3There are 3 independent heating areas from top to bottom. The 1st and 2ND are hot-air heaters, the 3rd is IR preheating, temperature controlled within ± 3 ° , Top heater can be adjusted freely, second heater can be adjusted up and down, these heaters can set many groups temperature parameters at the same time; The third IR area can be adjusted the power consumption. 4Offer all kinds of hot-air nozzle, it can rotate 360° , With magnet, easy to install and change, customized is available. 5Choose imported high-precision K-type thermocouple, closed loop control and automatic temperature compensation system. 6Use a V-groove equipped with a flexible fixture for PCB positioning to protect the PCB from deformation when heated or cooled, and it can rework any size of BGA chips. 7Powerful cross-flow fan rapidly cool the PCB board to improve efficiency, Also built-in vacuum pump and external vacuum suction pen, pick up the chips rapidly. 8Before finishing desoldering & soldering, There is an warning, There are emergency stop and Automatic power-off protection device when abnormal accident happens, with a double over-heating protection control. 9Identified by CE. 10It can repair Mobile, Laptop, PS3, xBox etc. And other components on the motherboard, it can meet repairment of lead and lead free soldering&desordering.