Introduction The KMPM series pellet plant is mainly composed of three main sections, namely feeder, conditioner and the main set of pellet mill. The main set of pellet plant is made of such components as machine body, machine shell, and main shaft assembly, quill main shaft assembly, die, roller assembly, cutting knife assembly, main motor driving system etc. Features 1. Adopting aerodynamics technology & the current round principle, reduce the temperature in pelletizing chamber and keep around 90° C, as a result the machine can work well continuously. 2. Timing feeder can control the feeding speed to lower the block ratio. 3. The body is more durable because we use ductile iron. 4. Capacity increased after adding another force feeder made from stainless steel to increase the feeding spread area. 5. Improved U type screw conveyor and adjustable feeding speeds allow continuous feeding without blockage 6. Gear driven through high precision gears. 7. The key working parts become stronger after modifying the material, heating processing technology etc. These main parts are forging pieces. Now, the processing of our ring die can reach to 800-1000MT. Ring die is assembled by quick-discharge clip. Advantages 1. Add Grease without turning off the machine: It can improve production efficiency and extend the service life of Bearing 2. Equipped with a cooling system in granulating chamber: It can reduce temperature of granulating chamber and extend the service life of roller. 3. High efficiency, lower power consumption, stable operation and production.MODEL POWER(KW) CAPACITY(T/H) DIMENSION (MM) NET WEIGHT (KGS) KMPM 350 65 0.5-1.0 2450× 1000× 2300 1990 KMPM 420 95 1.0-2.0 3200× 1100× 2850 2430 KMPM 508 132 1.5-2.5 3300× 1250× 2550 3500
