The pneumatic conveyer (ASP) is used in the dense phase pneumatic conveying system with top discharging materials. The powdered materials are mixed with air compressed in and fluidized, then conveyed by the pressure difference from the conveying tube to the silo. The mixture of the powdered materials and air can maintain a ratio just below the limit to avoid blocking, and assure a stable conveying with high density at the same time. The pneumatic conveyer (ASP) doesn't have any other rotary parts to contact with materials, just needs the compressed air to work. The pneumatic conveyer (ASP)can work alone or toghter with one or several transporters. Features A. Simple Structure B. Reliable Operation C. Low Failure Rate D. Scientific Flow Form E. Good Sealing Performance Main Technical Parameters Model ASP1.5 ASP2.0 ASP2.5 ASP3.0 ASP4.0 ASP5.0 ASP6.0 ASP8.0 ASP10.0 Conveying Distance about 1000m Conveying Capacity 15t/h 20t/h 25t/h 30t/h 35t/h 40t/h 55t/h 68t/h 82/h Working Pressure 0.2-0.7MPa Control Mode PLC, Remote Control, Or Manual Control
