Vibrating Feeder Vibrating feeder can feed lump or granulated materials to the other devices evenly and continuously. In sand and gravel production line, the continuous feeding of the vibrating feeding machine helps avoid the blockage at receiving hopper. With easy flow adjustment, low noise and energy consumption, vibrating feeder is applied to crushing and screening production lines on crushing site, in mining, metallurgy, building material, chemistry, mineral processing, and coal industries. Features: 1. Vibrating feeder enjoys simple structure, stable vibrating, even feeding, good continuous performance, adjustable excitation force, etc. Its flow rate can be conveniently changed and controlled. 2. It adopts eccentric block as the excitation source and features low noise, low energy consumption, good adjusting performance, and no material splashing. 3. Closed type vibrating feeder can prevent the pollution of dust. 4. The pressure caused by the material to the groove should be reduced to the greatest extend. The effective discharge opening should be smaller than the one quarter of the groove width. The flow rate should be controlled within 6-18m/min. 5. For feeding materials with a large quantity, a fender with enough height should be installed at the outlet. This fender should not be fixed to the feeder since it will affect the performance of the machine. 6. For smooth charging, the best discharging angle is 55-65 degrees Working Principle: This vibrating feeder adopts an eccentric block to produce centrifugal force which makes the movable parts like screen box and vibrator move continuously in a circle or an approximate circle. The material then vibrates and jumps with the screen box on the tilted screen and is then continuously and equably discharged. Vibrating Feeder Model GZD-600×1800 GZD-800×3000 GZD-960×3800 GZD-1100×4200 GZD-1100×4900 GZD-1300×5200 ZSW-960×3800 ZSW-1100×4900 ZSW-1300×4900 Size of funnel(mm) 600×1800 850×3000 960×3800 1100×4200 1100×4900 1300×5200 960×3800 1100×4900 1300×4900 Max.feeding size(mm) 300 400 500 580 580 650 500 580 750 Capacity(t/h) 30-80 80-120 120-210 200-430 280-500 450-600 90-200 180-380 250-450 Motor power(kw) 1.1×2 1.5×2 2.2×2 3.7×2 5.5×2 7.5×2 11 15 22 Weight (kg) 1050 3195 3980 5570 6520 8200 3980 5320 5900 Dimension (L×W×H)(mm) 2200×1100×600 3110×1600×1600 3850×1950×1630 4400×2050×1660 5200×2050×1700 5200×2350×1750 3882×2224×2121 4957×2500×1365 4957×2580×2083
