Semiconductor CO2 laser marking machine can mark mobile metal products. Series of semiconductor-pumped CO2 laser marking machine is the latest development product, based on the lamp-pumped laser marking machine replacement products. CO2 laser marking machine is a solid state laser. CO2 Laser Marking Machine Advantages: The size of HTJ Diode side-pump Laser Marking Machine is small. The volume is only 1/4 of the traditional lamp pump laser. The optical system uses the fully sealed structure to prevent the dust enters laser body and reduces the equipment failure rate. The machine is able to preview the light path and point out the focus, which are very convenient for the materials that will be processed to be located. This machine provides the precise three dimension worktable and newest outside water-cooling system. The cooling system can control the water temperature very accurately, which ensures the long time working. Anyway, the machine movement noise is extremely low. The software own intellectual property rights. It is compatible with file formats saved by CORELDRAW, AUTOCAD, PHOTOSHOP and other software. It can mark autocode, sequence number, batch number, date, bar code, two-dimension code, etc. Anyway, the softwarecan mark reversely. ThisModel Optional Models Type HTJ-50 HTJ-75 HTJ-100 Laser Power 50W 75W 100W LaserWavelength 1064nm 1064nm 1064nm Cooling System Water cooling Water cooling Water cooling Beam Quality M2< 6 M2< 6 M2< 6 Laser Repetition Frequency ≤ 50KHz ≤ 50KHz ≤ 50KHz MarkingArea 110mm*110mm 110mm*110mm 110mm*110mm Optional MarkingArea 150mm*150mm 200mm*200mm 300mm*300mm Marking Depth ≤ 0.3mm ≤ 0.4mm ≤ 0.5mm The depth is adjustable according todifferent materials. Linear Speed ≤ 7000mm/s ≤ 7000mm/s ≤ 7000mm/s Min. Line Width 0.02mm 0.02mm 0.02mm Min. Letter 0.25mm 0.25mm 0.25mm RepeatableAccuracy± 0.001mm± 0.001mm± 0.001mm GrossPower ≤ 2.5KW ≤ 2.8KW ≤ 3.3KW Electricity Source 220V/50Hz/15A 220V/50Hz/20A 220V/50Hz/25A