DY-HAL-IV Hand-push Airless Road Marking Machine 1. Engine: 6HP Gasoline Engine 2. Marking With: 100-450mm(Spray with Gun) 3. Paint Tank: 80KG DY-HAL-IVHand-push Airless Road Marking Machine mainly is suitable for the road, the parking lot, the airport, the gas station, the company factory district and spreads delimits to mark the straight line, the dashed line, the curve, the zebra crossing, the writing, the arrow, the graphic mark etc. Note: 1. Option for line driver DY-RB-II for operator to realize automatic function. 2. B type equipped with air-compressor, glass beads pressurized bin, glass beads spray gun and glass beads spray control system and stainless steel spray system to meet the needs of water paint construction. 3. Except all the functions of B type, C type equips with a micro-electric control system, which consists of Micro-electric controller, on-off coder, electromagnet, special gun bracket and so on. This system can be set four kinds of marking way according to the national road marking standard, and realized fully automatic control. 4. Equipped with 2 new-type manual spray guns with hard side columnar reverse washed nozzles(20/25 or 30/25) which can make the on-spot discharging easy and convenient; The non-arc nozzle ensures the line straight and exact. The hand brake controller makes the change among single, double or three spray guns flexibly. Technical Data of DY-HAL-IVHand-push Airless Road Marking Machine
