This machine is used for the aseptic packaging of liquid in plastic ampoules. Forming the ampoules, filling and sealing in one continuous operation cycle, all manufacturing steps are operated into a single machine over aseptic condition. Performance and characteristics 1. Moldular construction: Accessibility for the maintenance and service. 2. Space required is only a fraction compared with other methods entail, empty containers storage is eliminated. 3. Fully automatic machine, the workforce is reduced. 4. High mould closing forces. 5. Time-pressure dosing system, filling volume can be set and adjusted conveniently, and the filling volume shall be accurately controlled. 6. Automatic parison gripper for start-up. 7. Parison head exhaust system. 8. Sterilization system: The system ensures the needs of aseptic filling and sealing process. All the sterile pipelines will be able to be sterilized periodically and repeatedly by steam. Technical parameter Product: Waterlike, small volume parenterals, ophthalmic solutions Plastic material: PE, PP Volume: 0.4ml-20ml Capacity: 9000 pcs/h ± 10%, subject to product characteristics and plastic specification Electrical connection: Approx. 75 KW 380V 50Hz Compressed air: 8bar oil free 300NL/min Cooling water: 3m3 celsiusdegree 12 2bar Steam: 2.5bar preparation 40kg/h production 15kg/h Cleaning: 2.5bar product line 15min mould vacuum 1m3 60 celsius degree15min Overall dimension: 5260*2600*3015 Weight: 8000kg