Hammer Crusher Application: The hammer crusher also named hammer mill, which is suitable for MID-hard and light erosive materials, whose pressure resistance strength is no more than 100Mpa and humidity lower than 15%, such as coal, salt, chalk, gypsum, blocks, limestone, etc. The PC-Hammer crusher is suitable for both dry and wet crushing of brittle, medium-hard materials for the mining, coal, metallurgic, construction material, road building, and chemical industries. The maximum, compressive resistance of the crushed materials can be up 150Mpa. It crushes by the collisions between high-speed hammer and materials, has features of simple structure, high reduction ration, high efficiency, etc. Features of hammer crusher: 1. It is of various types. 2. It is suitable for crushing maximum, medium and minimum stones. 3. It is easy to be operated. 4. Simple structure; High reduction ratio; Low operation cost; Easy maintenance; Working Principle of Hammer Crusher: The motor drives the rotor rotates of the Hammer Crusher at a high speed through the belt, and on the rotor there are series hammers. When the materials get into the working area of hammers, they are crushed by the rotating hammers of the Hammer Crusher with high rotation speed, the products which are crushed to meet the required size can be discharged by the outlet and become the final products, the large size products are brought back to the crushed area by the hammers of the Hammer Crusher for being re-crushed until they reached the required size. Hammer Crusher Hammer Mill hammer breaker
