1. Low noise blower 2. High efficiency 3. Energy concerving blower 4. High rising pressure pump 5. Stable operation, long life 1. Low noise, due to the helical suction and discharge, the blower air flow in and out according to the direction of spiral line, all these prevent the pulse noise and vibration. What's more, by using the impedance complex muffler, the noise of our blowers are further reduced. 2. High volume and anti-heat efficiency, so it is energy-saving. The blower rotor adopted the advanced composite curve, the meshing is more reasonable, and further increases the volume efficiency. 3. Stable performance, the blower rotor, casing, wall panels, shaft and other key components are all produced by the advanced digital-contral processing equipment thus make the interchangeability of parts and components increased. 4. Low vibration. Although the rotor has been processed precisely, and are all in balancing condation, we still adopted the high precision balancing equipment and grinding machine to make it more balance, therefore, the blowers are almost no vibration. 5. With high precise and hardness Synchronization gear, we not only extension blowers life, but also reduce its noise. 6. Our blower bearing is introduced from Japan, there are two lubrication styles: Fat grease (below 0.6kgf /cm2), oil splash grease(0.7-0.9kgf /cm2). Which makes the product quality more liable. 7. The transported air is clean and without any oil-dust, as the blower sealing structure is reasonable, oil can not enter the chassis, thus the air is very clean.
